Skip to main content CONTENT

Mold air quality testing

Buck BioSlide spore trap air sampling pump on a tripod in a hotel corridor during mold clearance testing
Residential services

Mold Air Quality Testing in DC, Maryland and Virginia

Spore trap air samples from the rooms you are worried about, compared to an outdoor control and explained in a written report by an industrial hygienist.

Spore trap air sampling Outdoor control sample AIHA-LAP accredited lab Chain of custody on every sample No remediation sold
How we sample

Indoor air, judged against your own outdoor air.

We collect non-viable spore trap samples inside the areas of concern and one outside. The outdoor sample sets the normal background, so we can tell whether indoor levels are elevated or typical.

  • Calibrated pumps at the industry-standard 15 liters per minute for five minutes, 75 liters of air per sample.
  • Breathing zone samples taken where you live and work, not in a corner nobody uses.
  • Outdoor control on every job, so results are compared to real conditions that day.
Buck BioSlide bioaerosol air sampling pump mounted on a tripod for mold spore trap sampling
Buck BioSlide spore trap pump on a tripod
Start to finish

Four steps to a clear answer.

1

Indoor samples

Spore trap samples collected directly in the rooms of concern.

2

Outdoor control

One sample outside establishes the normal background for comparison.

3

Lab analysis

Samples go under documented chain of custody to an AIHA-LAP, LLC accredited microbiology lab.

4

Written report

Results interpreted by an industrial hygienist, with recommendations where warranted.

What you receive

Numbers you can act on.

We do not perform remediation, so the report is objective, data driven and defensible.

  • Spore identification by genus grouping.
  • Total spore concentrations for every sample.
  • Comparison to the outdoor baseline, room by room.
  • Professional interpretation in plain English.
  • Clear recommendations when action is needed.
Buck BioSlide spore trap air sampling pump on a tripod collecting a mold air sample in an office
Spore trap sample in an office
Questions

Before you book.

Is there a safe number of spores?

There are no established regulatory limits for airborne mold spores indoors. That is why we compare indoor results and spore types to the outdoor control, together with what we see on site.

I can already see mold. Do I need air testing?

Usually not. When growth is visible, the priority is finding the moisture and defining the cleanup. Air sampling is most useful as an investigative tool and for clearance after remediation.

Who analyzes the samples?

An AIHA-LAP, LLC accredited microbiology laboratory, under documented chain of custody.

Do you do the remediation too?

No. We are an independent consulting firm. We test and report; we never sell the cleanup.

Talk to an industrial hygienist today.

Weekdays 9 to 5. Describe what you need and we will quote it on the call.